CNC Aluminum Enclosure Box Anti Corrosion High Power With Anodizing

Description

This aluminum profile housing heat sink is based aluminum profile 6063-T5 material to processing, first of all, we check the raw material dimension is fine or not, the second is that according to the drawing, cutting right length, the third is that accroding to the drawing, use the wood machine to cut the outline dimension, the forth is that use the CNC to do exact dimension, the fifth is do anodizing clear, the last step is riveting, and then inspection/packing. First inspection and patrol inspection are done in processing .

CATEGORY: HEATSINK ENCLOSURES・HEATSINK CASES・COOLING CASE・HEAT DISSIPATING ENCLOSURE・FANLESS ENCLOSURE

Note

The production method of aluminum profile shell is simple, the production efficiency is high, and the mold cost is low, so it is very popular. What are the types of aluminum enclosures?

Electronic products

Such as power bank enclosures, circuit board enclosures, case shell, etc.

Power enclosures

Which products will use aluminum profile enclosures and which products will use aluminum profile enclosures

Lamp enclosures

Lamp enclosures are mainly LED lamp enclosures, explosion-proof lamp enclosures, LED display enclosures, etc.

Controller enclosures

Such as solar light controller housing, inverter housing, etc.

Instrument shell

Such as power meter housing, security meter housing, detector housing, etc.

​Aluminum alloy is a kind of non-ferrous metal structural material widely used in industry. It is widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industries, especially as a shell. specific purpose:

Aluminum has good ductility (its ductility is second only to gold and silver), and can be made into aluminum foil with a thickness of less than 0.01mm at 100°C~150°C. These aluminum foils are widely used in packaging bags, and can also be made into various aluminum products, such as aluminum strips.

The conductivity of aluminum is second only to silver and copper. Although its conductivity is only 2/3 of copper, its density is only 1/3 of copper. Therefore, for the same amount of electricity, the mass of aluminum is only half of the mass of copper. The oxide film on the aluminum surface not only has corrosion resistance, but also has insulation properties, (Foshan Hangmei) Therefore, aluminum has a wide range of uses in the electrical appliance manufacturing industry.
The density of aluminum is very small. Although it is relatively soft, it can be made into various aluminum alloys, such as hard aluminum, super hard aluminum, and rust-proof aluminum. These aluminum alloys are widely used in manufacturing industries such as airplanes, automobiles, and trains. Generally, the amount of aluminum used in large passenger ships usually reaches thousands of tons.

We builds custom machined enclosures using 3 axis and 5 axis CNC milling, and makes it an easy one-stop factory experience.

Our CNC machined enclosures are 100% custom made to your design in 2-3 days, with no minimum order. These enclosures are milled from solid stock, which makes them incredibly durable, and allows a very high level of protection from the elements. Machined enclosures are typically milled from aluminum, which machines quickly and cost effectively (we can accommodate other materials on special order).

As with all our enclosures, you simply specify all of your features and custom cutouts in your design, and we create them during fabrication. That way, your enclosure is ready to use, and you don't have to waste time drilling and filing as with off-the-shelf enclosures.

Choose from a wide variety of finishes, graphics and permanent marking, in order to suit your project’s functionality and desired aesthetics.

Whether for a server, a machinated PC or to house any other components that need to be mounted in a racked cabinet, We can manufacture fully finished machined enclosures for your specific application in 2-3 days, with no minimum order.

Dongguan Radford Metal Products Co., Ltd. is a professional precision manufacturing service provider of various materials, including precision machining of stainless steel, precision machining of aluminum products, precision machining of copper products, precision machining of iron products, and precision machining of plastic parts. In order to better serve customers, the equipment used by our company is mainly imported equipment, and the precision can reach 0.001 mm. Ledford adheres to the operating principle of "integrity first, service first, mutual benefit and mutual benefit", and has been continuously obtained by domestic and foreign companies. Good reviews from foreign customers. In the continuous expansion of channels, the products are exported to Europe, America, Southeast Asia, and the Middle East, and undertake OEM orders at home and abroad to meet customer needs in all directions and from multiple perspectives. A good customer base drives the company's rolling development, promotes self-development of new products, and the continuous pursuit of high-quality progress. The company always puts technology and customers first, and is committed to creating value for customers and providing customers with better products and services. Welcome to visit and send Inquiry !